wordpress visitor
Sitemap | Support | Contact Us | View My Cart
search this site the web
search engine by freefind
Call toll free 1-800-458-1666



customer service chat!



Enter Your Email Address to receive updates and coupons

    follow me on Twitter

    DD3 ISA

    The DD3 ISA IDE RAID 1 disk mirroring controller is an ideal IDE RAID solution for any computer system outfitted with one or more ISA slots. It can prove to be an extremely cost effective RAID mirroring solution, particularly for rackmount systems. The DD3 ISA is based on Data Protection Solutions by Arco's patented DupliDisk disk mirroring technology. It offers an ideal solution for industrial chassis and for mirroring IDE drives. The DD3 ISA is designed to use the ISA slot for power only; it is not affected by ISA throughput speeds. Also, because the DD3 ISA RAID controller handles all IDE RAID mirroring tasks onboard in hardware, disk mirroring makes no demands on computer system resources.

    The DD3 ISA mounts easily into any standard ISA slot and mirrors two IDE drives. Simply drop the ISA board in place, connect your IDE (Parallel ATA) drives with the provided cables and run our quick and easy mirroring utility. When you're done, you'll have real time backup! Every time you save data to your drive, the DD3 ISA will automatically send the information to both drives, so you always have an exact (and bootable, where applicable) duplicate of your drive and all the information it contains. If one of the drives fails, an alarm will sound to let you know a drive needs to be replaced but the other drive will take over automatically. The DD3 ISA provides back panel status lights, serial port and alarm reset. The device uses the slot for power only and not for data transfer, it is not hampered by the normal speed limitations of ISA devices.

    Features



    • Patented IDE (PATA) RAID mirroring technology
    • Compact ISA design
    • Operating system and platform independent
    • No BUS slot required
    • No need for IRQs, TSRs or device drivers
    • Supports one pair of IDE (PATA) hard drives (one Primary and one Mirror)
    • Supports drives up to 144 petabytes (48 bit LBA)

    Benefits



    • Quick and easy installation
    • Support for mixed (dissimilar) drives
    • Data saves sent to both drives simultaneously
    • Mirrored drives are both bootable
    • If one drive fails, the remaining drive assumes control
    • Readily accessible front panel alerts: audible alarm and visual LEDs
    • Easy-to-use Windows XP/2000/2003/Vista Management Utility
    • True background under Windows
    • Available mirroring utility for non-Windows systems
    • 100% data redundancy

    Specifications

    Drive Interface DE/E-IDE/UDMA (Parallel ATA)
    Data Path IDE/E-IDE/UDMA
    Defined by host controller
    Hard Disk Interface Cable 18 inches maximum
    80 Conductor - 40 pin connector
    Host Interface Cable 18 inches maximum
    80 Conductor - 40 pin connector
    Electrical Input Voltage 5V DC (+/- 5%)
    Current 450ma operating, 600ma peak
    Physical Dimensions Length: 6.5''
    Width: 3.625''
    Operating Temperature: 0 to 50 degrees C
    Humidity: 8 to 87% non-condensing
    MTBF MIL-HDBK-217 = 580,383 hours
    Bellcore rating = 2,695,418 hours
    EMC/EMI Compliance FCC class B certification
    CE certification




    Part Number: DD3-ISA.A
    MSRP: $99.00

     
    All contents © copyright 2009 Data Protection Solutions by Arco. All rights reserved. Contact Us