|
File Name: EzCopy1_06_2_U.zip
File Size: 424 KB |
| Installation
Instructions |
- Download the file to your hard drive and unzip the file to any location. Remember the location that you unzipped it to.
- Connect one side of the supplied Null Modem Cable to the back of the EzCopy's enclosure and connect the other side to your computer's COM port.
- IMPORTANT: Before running the application, use the Blue buttons adjacent to the LCD to scroll to “Bios Upgrade” prompt. Selecting “Select” at the “Bios Upgrade” prompt will prompt you to “Turn EzCopy OFF/ON when Upgrade is done”. At this point, run the application.
- Start the EzRaid DD4 application. Choose the Tools dropdown menu and select Upgrade Firmware from the menu. Click no when you are prompted to download from the internet. This will bring up the explorer box.
- Select the file named "EzCopy1_06_2_U.hex" and press open. Click okay to the next prompt asking you if you want to upgrade from this file. The upgrade process will now begin.
- When the upgrade is complete power down your system, and restart it. You can now verify that the upgrade was successful by checking under the General tab. The correct upgrade file will now read, "1.06.2".
|
